|
The bottom-hole pressure measurements of
the KPG gauge and the temperature recordings
of the KTG gauge are accurate, sensitive,
reliable and cost effective.
The KPG and the KTG LV Temperature Recorder
use the principal of the multiple helical
coil bourdon tube, which has been used for
over 50 years providing rugged and dependable
operation.
The KTG Bi-Metal Temperature Recorder
uses two unique metals which react differently
to temperature. This reaction creates rotation
in the coil. The clock is used to regulate
the travel of the chart carrier through
the lead screw, lead nut and push rods.
The recording section of the KTG LV and
Bi-Metal transmits the rotation of the bourdon
tube (or external coil) to the stylus shaft
which is connected to the stylus assembly,
rotating within the chart carrier. The stylus
assembly scribes a mark on a coated chart
within the chart carrier.
The LV element uses an external coil on
the top end which transfers temperature
down through the sensing element. The Bi-Metal
element uses a special housing that transfers
well temperature to the sensing element.
Both the LV and the Bi-Metal elements are
quick responding, corrosive resistant and
reliable.
|
